61 SERVICES
POWER ZONE عربي Request a site visit
ServicesAboutLebanonDubai
Get a quotationDubai prices AEDLebanon prices USD
How we workFAQTrust & SecurityContactPrivacy policyTerms of use

Electrical installation, repairs and equipment maintenance

Electrical installation, repairs and equipment maintenance is a Power Zone service in Lebanon and Dubai, part of electrical, generators & solar. Request it online; most jobs start with a site survey and an itemised quotation.

Most electrical problems announce themselves before they become dangerous: a breaker that trips again and again, a socket that is warm to the touch, lights that dim when the AC starts, a faint smell of hot plastic. Electrical repairs are not a do-it-yourself job; DEWA in Dubai advises using accredited technicians for installation and maintenance, and the same rule protects you in Lebanon.

Our electricians install, extend and repair wiring, sockets, switches, isolators and fixed equipment, and they find the cause of a fault before replacing anything. In Lebanon that includes changeover between state power, the generator and solar; in Dubai it includes the heavy AC and kitchen loads that summer brings. Our electrical guides for Dubai and Lebanon explain the warning signs in detail.

What's included

  • Fault finding: tripping breakers and RCDs, dead circuits, warm sockets, flickering lights
  • New sockets, switches and circuits, sized and protected for the load
  • Wiring for fixed equipment: water heaters, ovens, AC units, pumps and gate motors
  • Repairs to damaged cables, burnt sockets and loose connections
  • Isolators and outdoor connections for AC units, pools and garden equipment
  • Testing after the work and updated circuit labels on the board

When you need it

  • A breaker or residual current device that trips repeatedly
  • Warm, discoloured or scorched sockets, plugs or switches
  • Lights that flicker or dim when a large appliance starts
  • Extension leads used permanently because there are not enough sockets
  • Any tingle when touching an appliance, tap or metal surface

What affects the price

  • How long it takes to find the fault
  • Cable routes and access: chasing walls, ceilings, outdoor runs
  • Materials: cable sizes, protection devices, fittings
  • Making good after the work: plaster, paint and tiles where opened

There are no fixed prices: every quotation is itemised after the site survey.

Questions

Why does my breaker keep tripping?

Usually because a circuit is overloaded, an appliance is faulty, or there is a fault in the wiring. Replacing the breaker with a larger one removes the protection, not the problem; an electrician needs to find the cause.

Can you add sockets without breaking walls?

Often the cable can run through existing conduits, ceilings or surface trunking. Where a wall has to be opened, we open the smallest area needed and make good afterwards; the quotation shows which method applies.

Do you work on generator and solar changeover in Lebanon?

Yes. Changeover switches, panel connections and protection between state power, the generator and solar are part of our electrical work in Lebanon. Our Lebanon electrical safety guide explains why the changeover must never let two sources feed each other.

How the job runs

  1. RequestChoose the service, add photos and tell us how urgent it is.
  2. Site surveyAn engineer visits, measures, photographs and records any risks.
  3. Itemised quotationEvery line priced, tax shown separately, warranty terms included.
  4. The workProgress photos as we go. Any change is approved by you first.
  5. HandoverSnag check, warranty certificate and the final invoice.

Request this service

Electrical installation, repairs and equipment maintenance
Illustrative image

Related services

Related guides

Chat with us on WhatsApp
WhatsAppRequest a visit